Changing Mode Priorities While Scan Is On (W7 And W9 Control Heads Only); Restoring Mode Priorities In A Scan List (W7 And W9 Control Heads Only) - Motorola ASTRO XTL 5000 User Manual

Changing Mode Priorities While Scan Is On
(W7 and W9 Control Heads Only)
When active, this dynamic priority feature allows you to change the
priority of a non-priority mode in the scan list to priority 2.
To change the priority of a non-priority channel in the scan list to
priority 2, press
You cannot alter the status of the priority 1 member.
Restoring Mode Priorities in a Scan List
(W7 and W9 Control Heads Only)
To restore the original mode priorities in a scan list, do one of
the following:
• Press
• Turn scan off, then on.
• Change modes.
• Turn off the radio, and then turn it back on.
ASTRO XTL 5000 Digital Mobile Radio with W4, W5, W7, and W9
.
Sel
.
Rcl
General Radio Features
33