Scan Operation; Introduction; Turning Scan On/Off; Programming/Viewing A Scan List - Motorola GTX User Manual

Scan Operation

24

INTRODUCTION

The scan feature allows you to monitor activity on different trunked
modes and conventional channels by scanning a list of up to eight
(8) members. Trunked modes and conventional channels are pre-
programmed into a scan list by your authorized Motorola dealer.

TURNING SCAN ON/OFF

1. To turn Scan ON, press the
•
The (
active. The radio will scan for activity in the trunked modes/
talkgroups or conventional channels that are defined in the
scan list.
2. To turn Scan OFF, press the
N OTE: To initiate a call properly during scan mode, press the PTT button for a
few seconds.
PROGRAMMING / VIEWING A SCAN LIST
1. Press the
display indicates:
2. Press the
"Scan Programming/Viewing mode".
•
The radio will sound four quick
tones and the display will indicate:
3. When in scan programming, use the Talkgroup Select
or buttons to scroll through all trunked modes/talk-
groups and conventional channels.
•
Trunked modes/talkgroups and conventional channels cur-
rently in the scan list will be indicated by the (
icon.
) scan icon will be displayed, indicating scan is
Menu button until the
Select button to select
Sel
Scan button.
Scan button again.
) scan