Changing Mode Priorities While Scan Is On
When active, this dynamic priority feature allows you to change the
priority of a non-priority mode in the scan list to priority 2.
1
Press DYNP softkey to change the priority of a non-
priority channel in the scan list to priority 2.
2
Press the HOME button momentarily to exit the scan list
and resume scanning.
You cannot alter the status of the priority 1 member.
Restoring Mode Priorities in a Scan List
To restore the original mode priorities in a scan list, do one of
the following:
•
Press the RCL softkey.
•
Turn scan off, then on.
•
Change modes.
•
Turn off the radio, and then turn it back on.
ASTRO XTL 2500 Digital Mobile Radio with M5 Control Head
General Radio Features
41