Send Data Using Bluetooth Connectivity; Pair Devices - Nokia 5800 XpressMusic User Manual

Send data using Bluetooth connectivity

Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset, you
can also transfer files to another compatible device at the
same time.
1. Open the application where the item you want to send is
stored. For example, to send an image to another
compatible device, select
2. Tap an item, and select
Bluetooth.
Devices with Bluetooth wireless technology that are
within range are displayed. Device icons are as follows:
computer
phone
audio or video device
other device
To interrupt the search, select Stop.
3. Select the device with which you want to connect.
4. If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter a
passcode. The same passcode must be entered in both
devices.
When the connection is established,
displayed.
Tip: When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter *#2820#.
© 2008 Nokia. All rights reserved.
Gallery Images & videos.
>
Options Send Via
> >
Sending data

Pair devices

Select Menu
>
To pair with compatible devices and view your paired
devices, open the
Before pairing, create your own passcode (1 to 16 digits), and
agree with the owner of the other device to use the same
code. Devices that do not have a user interface have a factory-
set passcode. The passcode is used only once.
1. To pair with a device, select
device. Devices that are within range are displayed.
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device, as well.
3. Some audio accessories connect automatically to your
device after pairing. Otherwise, to connect to an
accessory, select
Paired devices are indicated by
To set a device as authorised or unauthorised, select from the
following:
Set as authorised
●
and the authorised device can be made without your
knowledge. You will not be asked for authorisation or
acceptance separately. Use this status only for your own
devices, such as your compatible headset or PC, or devices
that belong to someone you trust.
is
devices in the paired devices view.
Set as unauthorised
●
device must be accepted separately every time.
To cancel a pairing with a device, select
Settings and Connectivity
Paired devices tab.
Options
Options Connect to audio
>
in the device search.
— Connections between your device
indicates authorised
— Connection requests from this
Connectivity
> Bluetooth.
New paired
>
device.
Options > Delete.
75