Active Data Connections; Synchronisation - Nokia 5800 XpressMusic User Manual

Advanced WLAN settings
Select Options Advanced settings
>
following:
IPv4 settings — Enter the IP address of your device, the
●
subnet IP address, the default gateway, and the IP
addresses of the primary and secondary DNS servers.
Contact your internet service provider for these addresses.
IPv6 settings — Define the type of DNS address.
●
Ad-hoc channel (only for Ad-hoc) — To enter a channel
●
number (1-11) manually, select
Proxy server address
●
server.
Proxy port number
●

Active data connections

Select Menu Settings
>
mgr..
In the active data connections view, you can see the open
data connections:
data calls
packet data connections
wireless LAN (WLAN) connections
Note: The actual invoice for calls and services from
your service provider may vary, depending on network
features, rounding off for billing, taxes, and so forth.
To end a connection, select
© 2008 Nokia. All rights reserved.
and from the
User defined.
— Enter the address for the proxy
— Enter the proxy port number.
and Connectivity Connection
>
Options > Disconnect.
To end all open connections, select
all.
To view the details of a connection, select
Details.

Synchronisation

Select Menu Settings
>
transfer > Sync.
The Synchronisation application enables you to synchronise
your notes, calendar entries, text and multimedia messages,
browser bookmarks, or contacts with various compatible
applications on a compatible computer or on the internet.
You may receive synchronisation settings in a special
message from your service provider.
A synchronisation profile contains the necessary settings for
synchronisation.
When you open the application, the default or previously
used synchronisation profile is displayed. To modify the
profile, tap a synchronisation item to include it in the profile
or to leave it out.
To manage synchronisation profiles, select
desired option.
To synchronise data, select
cancel synchronisation before it finishes, select Cancel.
Connectivity
Options Disconnect
>
Options
and Connectivity Data
>
Options
Options > Synchronise. To
>
and the
73