NEC N8100-1447F User Manual page 69

The items which can be set on the Main menu screen and their functions are described below.
Option
System Time
System Date
Legacy Diskette A
Hard Disk Pre-Delay Disabled
SATA Port 1 - 6
Advanced Processor
Options
Language
IMPORTANT:
operation if any of the following conditions is applicable.
After carriage of device
After storage of device
After the device is entered into the pause state under the
environmental condition enduring device operation (temperature:
10°C - 35°C, humidity: 20% - 80%)
Check the system clock at the rough rate of once per month. When the
system clock is installed in a system requiring high time precision, it is
recommended to use a time server (NTP server).
If the system clock is remarkably delayed or advanced as the passage of
time in spite of adjustment, contact your service representative for
maintenance.
Parameter
HH:MM:SS
MM/DD/YYYY
[Disabled]
360Kb 5 1 /
4
1
1.2MB 5 /
4
1
720Kb 3 /
2
1
1.44/1.25MB 3 /
2
1
2.88MB 3 /
2
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
[30 seconds]
–
Select submenu
[English (US)]
Français
Deutsch
Español
Italiano
Check and adjust the system clock before the
Description
Set the system time.
Set the system date.
Set the settings of optional floppy disk
drive.
If you install an optional internal floppy
disk drive, set this item to
1
"1.44/1.25MB 3 / ".
2
If you replace the floppy disk drive
with internal backup device and use
the external USB floppy disk drive for
reinstallation of OS or maintenance
work, set this item to "Disabled".
When accessing the internal SATA
hard disk drive for the first time during
POST, the system waits for the
specified time until the drive becomes
ready.
Displays the type of devices
connected to each port.
The settings of some items may be
changed. However, leave the items as
they are at the shipment.
Shows the processor settings
submenu.
Select which language BIOS displays.
Configuring Your Server 4-9
Your Setting
[ ]: Factory-set