Table of Contents
Advertisement
⑩ Click the
to save the current image as a bitmap or JPEG file format.
⑪ Click the
to set up the image drawing mode, OSD display and beep on/off. You can adjust the display speed
by changing the image drawing mode, select OSD information to be displayed on the screen, and turn the DVR's
internal buzzer on and off from a remote site.
⑫ The event status window at the bottom displays a list of events that were detected from the remote site.
⑬ Selecting a camera on the screen and clicking the right mouse button displays the text menu screen.
NOTE: A camera name change in the Web Watch mode does not affect the camera name set up on the remote
site. Leaving the Camera Title blank causes the camera name set up on the remote site to display.
The
icon will display on each camera screen when audio communication is available between the
WebGuard system and a DVR.
Web Search Mode
WebSearch is a remote web search program that allows you to search recorded video on the remote DVR.
NOTE: The remote site connection in the Web Search mode will automatically be disconnected if there is no
activity for 30 minutes.
① Click the
to log out the WebGuard program.
② Click the
to access to the web monitoring mode.
Change Camera Title: Changes the camera name.
Enable Audio: Enables audio communication with the remote site. When the
audio control panel displays, click the
site and click the button again to stop sending audio. Click the
audio from the connected remote site through the attached speaker and click the
button again stop monitoring live audio. Clicking both
communication. Clicking the
Aspect Ratio: Changes the image aspect ratio.
Anti-Aliasing Screen: Enhances image display quality by eliminating stair
stepping (aliasing) effects in the enlarged image.
Digital Video Recorder
to send audio to the connected remote
and
disables audio communication.
to monitor live
allows two-way
79
Advertisement
Table of Contents
