Spot Monitor; Figure 39: Display - Spot Monitor Setup Screen - PACOM PDR960H-8RT User Manual

8/16 channel digital video recorder

Hide thumbs Also See for PDR960H-8RT:

Table of Contents

User's Manual

NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3 mode of the 8-channel DVR.

You can adjust the display dwell time by highlighting the box beside Interval and pressing the

select dwell intervals ranging from 1 second to 1 minute.

Highlight Event Monitoring On and press the

it is On, the DVR will display the camera associated with the event when an event occurs.

Highlight the box beside Resolution and press the

for NTSC video, and 1280x1024, 1440x900 and 1920x1080 (@ 60Hz or 50Hz) for PAL video.

NOTE: When the individual main monitors are connected to the HDMI and VGA connectors for simultaneous

operation, it is recommended to use monitors supported with the same resolution. If monitors unsupported

with the same resolution are connected, video cannot be displayed on the monitor with the resolution

you have set.

Highlight Fit To Screen and press the

the DVR will resize video to fit the main monitor screen.

Spot Monitor

Highlight the box in the Channels column and press the

You can define which cameras display sequentially on the Spot Monitor when in the single-screen display format.

Highlighting the box under the Camera and pressing the

You can adjust the display dwell time by highlighting the box under the Dwell and pressing the

select dwell intervals ranging from 1 to 20 seconds.

button. Pressing the

button. You can select from 1280x1024, 1440x900 and 1920x1080

button. Pressing the

Figure 39: Display – Spot Monitor setup screen.

button.

button toggles between On and Off.

button toggles between On and Off. When

button toggles between On and Off. When it is On,

button. You can

Table of Contents

Pdr960h-16rt