JK Audio BlueDriver-M3 User Manual page 2

Description
The BlueDriver-M3 wireless audio interface uses
Bluetooth® Wireless Technology to add wireless
possibilities to your audio mixing console. Pair
BlueDriver-M3 to your Bluetooth enabled cell phone or
headset and plug the BlueDriver-M3 into one of the mic
input channels on your mixer. Connect the 3.5 mm
input of BlueDriver-M3 to the headphone output of your
mixer to complete the connection to your cell phone or
headset.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by JK Audio, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
2
FCC-B Part 15 Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
The internal antennas used for this mobile transmitter
must not be co-located or operated in conjunction with
any other antenna or transmitter.
This device has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial
environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may
cause harmful interference to radio communication.
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the
user will be required to correct the interference at his/
her own expense.
Changes or modifications not expressly approved by JK
Audio can void the user's authority to operate the
equipment.
15