Or, check out our FAQ section for answers to common questions. Limited Warranty The innkeeper 2/4 is covered by a 2 year warranty to be free from defective workmanship and materials. To obtain service, contact JK Audio by phone or email for return authorization.
Contents Contents Overview Getting to know your innkeeper 2/4 2 Controls & Indicators 4 Inputs & Outputs Remote Terminal Block Getting Connected Menu Navigation Serial Port Interface Conference Optional Remote Control FAQs Technical Information Contents...
Page 4
Master Send XLR Proprietary Auto Null Algorithm Caller XLR Line Outputs (2/4) (50 dB null) Monitor Handset Jacks Conferencing (innkeeper 2 only) Remote Control via RS-232 1 kHz Tone Generator RIU-IP Remote IP Interface Menu with Backlit LCD Display Send and Caller Signal Level LEDs...
Overview Introducing the innkeeper 2/4™ Innkeeper 2 and innkeeper 4 will allow you to send and receive audio over analog telephone lines. While this may seem like a simple task that any telephone can do, the challenge is getting the best quality audio from such a miserable audio path.
Getting to Know Your innkeeper 2/4 Controls & Indicators Menu Display Backlit LCD, 2x20 characters. Directional Control Pad Navigate the menu. Press <Enter> to make a selection. Numeric Keypad Dial a number or manually enter menu selection codes. Call Buttons Takes the corresponding line off-hook;...
Page 7
+/-10 dB range. Receive Signals The innkeeper 2/4 menu will allow you to adjust individual Caller output levels in 1 dB increments over a +/-10 dB range to give you the best signal level at your equipment. The Caller level control in the menu will not change what you see on the Receive LED.
A. RS-232 Cable (Included) B. JK Audio RIU-IP Remote Interface C. Remote Terminal Block (Included). See page 5. D. JK Audio Concierge Switch Core (Not compatible with innkeeper 4.) Power Jack Universal AC power input for 100-240 Volt, 50-60 Hz supply current.
Remote Terminal Block Remote Jack The 10 pin RJ-50 jack on the back of the innkeeper 2/4 provides a proprietary connection to the supplied remote terminal block. A 1-meter cable is provided for this connection. This jack can also be used to connect to the optional JK Audio RIU-IP remote interface unit (page 12).
Connect the supplied AC power cord to the back of the innkeeper and then to an AC power outlet. Your innkeeper 2/4 is now ready to take calls. You may want to connect an auxiliary telephone to the innkeeper <Aux> jack so you can dial out and set up calls, or use the <Auto-Answer>...
Page 11
<Call> button. You can use an auxiliary phone to place or screen a call and then place it on hold. When you are ready to take the call on innkeeper 2/4, simply press the <Call> button. Your telephone will automatically release the hold. If you need to take the call back on the aux telephone, simply pick up the telephone handset before the innkeeper 2/4 <Drop>...
Menu Navigation Backlit Menu Display and Controls The innkeeper 2/4 menu is controlled by the directional arrows, alpha numeric keypad and <Enter> button. You may use either the arrow keys to scroll through the menus or the keypad to directly select menus and use the <Enter> button or the keypad to make your selections.
Page 13
Conference (3,5) innkeeper 2 Only This menu allows you to configure settings for the Conference feature. (see page 11). Conf. Send Mix Mode (3,5,1) innkeeper 2 Only Configure the Send Mix Mode to "Send Mix" default or "No Mix" (page 11).
Status information is automatically returned during incoming state changes for the specified line number for the following line conditions: on-hook, off-hook, incoming ring, and line hold. innkeeper 2/4™ Digital Hybrid...
Page 15
Dial phone number on selected line, up to 20 /LxDIy Phone Digit String digits (line will automatically go off-hook). Number Off=0 innkeeper 2 only. Conference both phone lines /CNv Conference On=1 together (both lines must be off-hook first) Upload/download entire phonebook entry list Phone Book...
Advanced options are available for Conference mode; however for most situations it will not be necessary to change these default options. Innkeeper 2 Advanced Conference Options The factory default conference mode provides both callers with a mix of Line 1 <Send>...
This remote control interface was designed for use with innkeeper 1x/1rx as well as JK Audio innkeeper 2 and innkeeper 4 digital hybrids. This unit contains a web server which allows the user to send and receive control data through their web browser.
2. How do I adjust signal levels? Use menu settings to change input and output levels ±10dB. 3. How do I know what firmware my innkeeper 2/4 is running on and how can I update it? Contact support@jkaudio.com for possible firmware updates.
Hybrid Jack Caller 2 Line Level Phone Line 3 Send 3 Jack Digital Input Aux Phone Hybrid Jack Caller 3 Line Level Phone Line 4 Send 4 Jack Digital Input Aux Phone Hybrid Jack Caller 4 innkeeper 2/4™ Digital Hybrid...
Manufacturer’s 1311 E 6 Street Sandwich, Illinois 60548 USA Address: Declares that the product: Product Name: innkeeper 2/4 Two-Line/Multi-Line Digital Hybrid Model Numbers: innkeeper 2/4 Conforms to the following Product Specifications: Safety: EN 60950 / AS/NZS 60950:2000 CAN/CSA-C22.2 No. 60950-01-03 ESD: EN 55024:1998;...
Page 22
FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your JK Audio product. If such changes are planned, you’ll be notified by your telephone company.
Page 23
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Changes or modifications not expressly approved by JK Audio can void the user’s authority to operate the equipment. FCC Compliance Notice...