JK Audio BluePack User Manual
Wireless audio interface
Hide thumbs
Also See for BluePack:
- User manual (24 pages) ,
- User manual (24 pages) ,
- User manual (8 pages)
Advertisement
Table of Contents
Warranty
The model BluePack is covered by a 2 year
BluePack
warranty to be free from defective workmanship
and materials. In the event that the BluePack
needs repair, you must call us to get an
Wireless Audio Interface
authorization, and then carefully pack and ship
it to us. You will pay for shipping to us and we
will pay for return back to you, UPS ground. No
free repairs will be made if the defect was
caused by misuse, weather conditions, or other
cause, except for defective workmanship or
materials.
peak
THERE ARE NO EXPRESSED OR IMPLIED
WARRANTIES WHICH EXTEND BEYOND
THE WARRANTY HERE MADE.
User Guide
8/08
JK Audio, Inc. 1311 E 6th Street, Sandwich, IL 60548 USA
JK Audio
Voice: (815) 786-2929
Toll Free: 800-JK-Audio
Fax: 815-786-8502
info@jkaudio.com
www.jkaudio.com
©
Copyright
2008 JK Audio, Inc.
All rights reserved.
Advertisement
Table of Contents
Related Manuals for JK Audio BluePack
Summary of Contents for JK Audio BluePack
- Page 1 THERE ARE NO EXPRESSED OR IMPLIED WARRANTIES WHICH EXTEND BEYOND THE WARRANTY HERE MADE. User Guide 8/08 JK Audio, Inc. 1311 E 6th Street, Sandwich, IL 60548 USA JK Audio Voice: (815) 786-2929 Toll Free: 800-JK-Audio Fax: 815-786-8502 info@jkaudio.com www.jkaudio.com...
- Page 2 This equipment BluePack pairs to your cell phone like a Bluetooth generates, uses and can radiate radio frequency wireless headset. This professional microphone energy and, if not installed and used in accor-...
-
Page 3: Specifications
300 Hz - 3400 Hz Headset mode: TX 30 Hz - 17 kHz Note: While BluePack was designed to be very rug- RX 30 Hz - 20 kHz ged and durable, it is not waterproof and care should be taken to keep the unit dry. - Page 4 FAQs Features 1. This thumbwheel will control the level of your If I have an audio source connected to the Aux microphone input. Send input, will that audio also be present at the Output mini jack? 2. The peak LED indicates clipping on the input No, the stereo mini jack output only contains audio channel if the level is set too high.
- Page 5 FAQs Features What is the range of the Bluetooth transmit- 4. This LED flashes red when the BluePack has a ter/receiver? stereo listen-only audio connection to your Bluetooth device. If the music is paused, such BluePack will transmit and receive audio signals...
-
Page 6: Block Diagram
Connection Block Diagram 1. Connect your headphones to this 1/4” jack. The 1 watt stereo headphone output gives you a mix of the XLR mic input, 3.5 mm Aux Send input and Bluetooth audio. 2. The unbalanced 3.5 mm stereo fixed line level output jack provides your full bandwidth micro- phone signal on the left channel and Bluetooth audio on the right channel. - Page 7 Applications Connection Telephone Interviews Call out and interview other people as part of your pre-game show. Connect your mic and headphones as shown and send audio through the line output to your laptop for live streaming or to your portable recorder for later broadcast.
-
Page 8: Bluetooth Wireless Technology
Use the thumbwheel on the BluePack for a full 5 seconds and release. The blue top of the BluePack to set the volume level for the LED will flash rapidly, about every 100 ms, as mic input. - Page 9 When bonding is complete, the blue LED will flash through the Aux Send input. at a rate of 1 sec on, 2 sec off. Once BluePack has been added to your cell phone, subsequent con- nections can be made more quickly from Idle Mode.
- Page 10 2 sec on 200 ms on 100 ms on width. BluePack supports A2DP (Sink), Hands Free and Hold Bluetooth MFB in at least 5 sec Headset profiles with BlueCore 5-Multimedia tech- to reach Pairing Mode the first time nology. You will be able to receive full bandwidth...
Need help?
Do you have a question about the BluePack and is the answer not in the manual?
Questions and answers