JK Audio BlueDriver-F3 User Manual
Wireless audio interface
Hide thumbs
Also See for BlueDriver-F3:
- User manual (16 pages) ,
- User manual (24 pages) ,
- User manual (24 pages)
Related Manuals for JK Audio BlueDriver-F3
Summary of Contents for JK Audio BlueDriver-F3
- Page 1 ™ BlueDriver-F3 WIRELESS AUDIO INTERFACE User Guide JK Audio...
- Page 2 Welcome Contents Thank You Limited Warranty Thank you for purchasing the JK Audio BlueDriver is covered by a 2 year Overview BlueDriver-F3 Wireless Audio Interface. warranty to be free from defective Getting to know your BlueDriver-F3 Please read this guide for instructions workmanship and materials.
- Page 3 Overview Features Introducing the BlueDriver-F3. The BlueDriver-F3 wireless audio interface uses Bluetooth® Wireless Technology Trim Pot Adjusts Mic Level 3 Pin Female XLR Input to add wireless possibilities to your microphone or the mic level output of your audio mixing console. Model F3 provides a 2-way, full duplex voice band audio Mini USB Power Jack 1/8"...
- Page 4 Getting To Know your BlueDriver-F3 Starting Up Mode Switch Mic Trim If the power cable is connected when Charging the unit is shut down, the blue LED Before you turn the BlueDriver on, A small flat blade screwdriver can To achieve maximum battery capacity, will stay lit.
-
Page 5: Bluetooth Wireless Technology
2 seconds off. Once wireless technology enabled devices 2. From the powered-off state*, 2. Following manufacturer’s BlueDriver-F3 has been added within range that might also be in hold the Connect Button on the instructions, set your headset to to your cell phone, subsequent Pairing Mode. - Page 6 1 second on, 2 seconds off. The Idle Mode. connection to that device is secure. Note: If left unused in Idle or Pairing Mode, the BlueDriver will automatically disconnect the Bluetooth connection in two minutes and power off. BlueDriver-F3 Wireless Audio Interface Bluetooth Wireless Technology...
- Page 7 Wireless Applications Live Man-On-The-Street Backup Audio for Interviews Remote Broadcasts Simply plug BlueDriver-F3 into the You may have the finest IP CODEC bottom of a dynamic microphone, available, but if the internet goes then pair to a cell phone and dial down, there goes the remote.
- Page 8 Wireless Applications Wireless Applications Record Phone Interviews Transmit Bluetooth A2DP Audio Record high quality phone The “Headset” mode of BlueDriver-F3 interviews using your favorite mic connects to Bluetooth headphones and headphones. Simply plug or wireless speakers, and provides BlueDriver-F3 into the bottom of...
- Page 9 Broadcast High Quality Audio JK Audio ™ Phone Through Our Wireless Link Our BlueDriver-F3 (“Headset” mode) and BlueDriver-M3 (“Phone” mode) can be paired together to create a mono 20 kHz, full audio bandwidth wireless link. Range is limited to 40 feet, but this may be just enough for your application.
- Page 10 33 feet from for the slave device. If the BlueDriver the internal battery in about 2 1/2 Please contact JK Audio or a factory your Bluetooth wireless technology isn't pairing with your device, try hours. These batteries do not have authorized service center for battery enabled device.
-
Page 11: Technical Information
Distance 33 feet ( 10 meters ) every 90 days. The Lithium-Ion battery in this device is not user replaceable. Please contact JK Audio or a factory authorized service center for battery replacement. BlueDriver-F3 Wireless Audio Interface... - Page 12 Changes or modifications not and b) The telephone equipment's FCC by the FCC. For repair procedures, follow expressly approved by JK Audio can void the registration number. This can be found on the instructions outlined under the warranty user's authority to operate the equipment.
- Page 13 Toll Free: 1.800.jkaudio Fax: 815.786.8502 www.jkaudio.com © 2013 JK Audio, Inc. All rights reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JK Audio, Inc. is under license.