Fast Fill Waterfall Spout - Aquatic iNfiNity serIes Owner's Manual & Installation Manual

iNSTALLATiON iNSTruCTiONS
rOugh-iN MEASurEMENTS:
See Diagram 3A, below
B
A
3A

FAST FiLL WATErFALL SPOuT:

your fast fill Waterfall Spout will be stubbed as in Diagram 3B.
3B
fast fill Waterfall Spout is stubbed out
with a 3/4" female threaded PVC fitting.
See Diagram 3C for connecting the hot and cold valves.
3C
10
MOdEL
Infinity 1
Infinity 2
Infinity 3
Infinity 4
Infinity 5
Infinity 6
Infinity 7
Infinity 8
Infinity 9
PLEASE NOTE: THE MANUFACTUrEr ACCEPTS A 1/4" VArIANCE.
vARiAtiONS ON EACH tUB AND SPECifiCAtiONS ARE SUBJECt tO CHANgE AS WE
iMPROvE UPON OUR PRODUCt AS REQUiRED.
tHE DiMENSiONS NEEDED fOR SitE PREPARAtiON AND StRUCtURE BUiLDiNg
WILL DIFFEr; AqUATIC INDUSTrIES, INC. ASSUMES NO rESPONSIBILITY FOr
PREPARAtORy WORk.
fROM vALvES
A
(from center of overflow pipe
to outside rim)
3"
2 3/8"
1 3/8"
3"
3 1/2"
5"
5"
7"
2 1/2"
CAuTiON:
do not overtighten. do not use Teflon Tape.
B
(from center of
drain to tub rim)
24 1/2"
9 1/2"
10 1/2"
11 3/4"
11"
11 3/4"
11"
14 1/2"
8 3/4"
THErE ArE
aquatic Industries, Inc.