Aquatic iNfiNity serIes Owner's Manual & Installation Manual page 16

iNFiNiTy SEriES WhirLPOOLS
BAThSidE CONTrOL SySTEMS (continued):
iNFiNiTy jET SEquENCEr CONTrOL (SEE diAgrAM 6B):
1. To Turn jet Sequencer On: Pressing the "On/Off" button will turn the jet sequencer on. The system will then perform
an indicator light test and open all valves. Pressing the "On/Off" button a second time will turn the jet sequencer
off. A built-in timer automatically turns the jet sequencer off after 2 hours, unless manually deactivated first. Note:
Pump must be turned on for the jet sequencer to be effective (see "Infinity On/Off with Heater Control" above.)
2. To Choose Sequences:
sequences. Note: only the first 6 sequences have corresponding
indicator lights. the remaining sequences do not have indicator lights.
A preview of the massage is displayed for 5 seconds after selecting
a sequence.
3. To Change Speeds: Press the "Speeds" button to change the time
interval between each step of the selected massage sequence.
Speed 1: 15 Seconds between each step.
Speed 2: 10 Seconds between each step.
Speed 3: 5 Seconds between each step.
4. To Pause: Press the "Pause" button to interrupt a massage sequence and prolong the action of a jet set for a
combination of sets. Pressing a second time will resume the massage sequence. The "Pause" indicator light will
be on in "Pause" mode.
Other Features:
• Automatic purge: Thirty minutes after the jet sequencer has shut off, the solenoids will open and close to drain any
water from the pipes.
iNFiNiTy Air BATh CONTrOL (SEE diAgrAM 6C):
1. To Turn Air Bath System On: Pressing the On/Off
the blower on in "constant mode." Once the blower is on, pressing a
second time will turn the blower off. the light indicator will illuminate when
the system is on. the blower and the blower heater will automatically
shut off after a 20-minute period.
2. To Change Modes: Pressing the Mode
blower modes of operation from constant mode to wave mode and
then to pulse mode.
• Constant Mode: Consists of a constant blower level with no change. The light indicator will also follow the blower
intensity set by the user.
• Wave Mode: Consists of a gradual change of blower level to generate a gentle massage effect. The light indicator
will also follow the blower intensity.
• Pulse Mode: Consists of an instant change of the blower level to generate a massage effect. The light indicator
will also pulse as the blower does.
16
OPErATiON of
Press the "Sequences" button to select one of the 7 preprogrammed massage
button alternates the
6B
button will turn
6C
aquatic Industries, Inc.