Rough-In Measurements; Fast Fill Waterfall Spout - Aquatic Infinity Owner's Manual & Installation Manual

Infinity Owner's Manual & Installation Guide
INSTALLATION INSTRUCTIONS

ROUGH-IN MEASUREMENTS

See Diagram 3A, below
B
A
3A

FAST FILL WATERFALL SPOUT

Your Fast Fill Waterfall Spout will be stubbed as in Diagram 3B.
3B
Fast Fill Waterfall Spout is stubbed out with a
3/4" female threaded Brass fitting.
See Diagram 3C for connecting the hot and cold valves.
3C
Aquatic
MODEL
Infinity 2
Infinity 4
Infinity 5
Infinity 6
Infinity 7
Infinity 9
PLEASE NOTE: THE MANUFACTURER ACCEPTS A 1/4" VARIANCE. THERE ARE VARIATIONS
ON EACH TUB AND SPECIFICATIONS ARE SUBJECT TO CHANGE AS WE IMPROVE UPON
OUR PRODUCT AS REQUIRED.
THE DIMENSIONS NEEDED FOR SITE PREPARATION AND STRUCTURE BUILDING WILL
DIFFER; AQUATIC ASSUMES NO RESPONSIBILITY FOR PREPARATORY WORK.
FROM VALVES
A
(From center of overflow pipe
to outside rim)
2 3/8"
3"
3 1/2"
5"
4"
2 1/2"
CAUTION:
Do not overtighten. Do not use Teflon Tape.
B
(From center of
drain to tub rim)
9 1/2"
11 3/4"
11"
10 1/2"
10"
8 3/4"
9