Installing The Switch; Desktop Installation - Planet GSD-805 User Manual

8-port 10/100/1000 mbps gigabit ethernet switch

Hide thumbs Also See for GSD-805:

Table of Contents

1. The device is a power-required device, it

Power

Notice

2. In some area, installing a surge suppression

2.2 Installing the Switch

This part describes how to install your Gigabit Ethernet Switch

and make connections to it. Please read the following topics and

perform the procedures in the order being presented.

This Gigabit Ethernet Switch does not need soft-

ware configuration.

Note

To install the Gigabit Ethernet Switch on desktop, simply follow

the next steps:

Step 1:

Attach the rubber feet to the recessed areas on the

bottom of the Gigabit Ethernet Switch.

Step 2:

Place the Gigabit Ethernet Switch on desktop near an

AC power source.

Step 3:

Keep enough ventilation space between the Gigabit

Ethernet Switch and the surrounding objects.

means, it will not work till it is powered. If

your networks should active all the time,

please consider using UPS (Uninterrupted

Power Supply) for your device. It will prevent

you from network data loss or network down-

time.

device may also help to protect your Switch

from being damaged by unregulated surge or

current to the Switch or the power adapter.

Table of Contents