Liebert ITA UPS 16kVA User Manual page 36

28 Chapter 3 Operation And Display Panel
Menu
Function settings
Test command (start, stop
battery, system test or
frocing boost charge)
System version
Keypad window
The function of menu buttons (F1 ~ F4 and HELP) is shown in icon mode for the current display screen.
Item
LCD contrast Adjust the LCD contrast
YYYY MM DD, DD MM YYYY and MM DD YYYY formats can be
Date format
selected.
Date & time Set the date and time
Comm1 baud rate Set the communication baud rate of the USB port
Comm2 baud rate For internal communication only, can not be set
Comm3 baud rate Set the communication baud rate of the SNMP card port
UPS address This setting is suitable for RS485 communication
Communication mode Set the communication mode
If the communication mode of the SNMP card port is Modem, you can
Callback times
set alarm callback times here
If the communication mode of the SNMP card port is Modem, you can
Phone No.1
set phone No.1 here
If the communication mode of the SNMP card port is Modem, you can
Phone No.2
set phone No.2 here
If the communication mode of the SNMP card port is Modem, you can
Phone No.3
set phone No.3 here
Command password You can change the command password. Default: "123456"
Battery capacity test Battery capacity
Set the battery cell. The setting options include: 30-cell, 32-cell,
Battery cell
34-cell, 36-cell, 38-cell, 40-cell
Battery boost charge Enabled or disenabled
Temperature
Enabled or disabled
compensation
Temperature sensor Set the position of the temperature sensor. "Remote" only
Battery group sharing Set each single in parallel system to share the battery group or not
Single/parallel Set the single/parallel
Parallel number Set the parallel number
Redundant number Set the redudant number
ECO mode ECO function enabled
Output frequency Set the output frequency
Output voltage system Set the output voltage system
LBS LBS function enabled
Set the output system: 3-in 3-out/3-in 3-out
This setting can only be carried out after the EPO operation. After the
3-in 3-out/3-in 3-out setting, you must power off the system, and confirm that the system
actual connection mode complies with the setting. Power on again,
and the setting can come into force
The battery maintenance test will lead to the battery being partly
Battery maintenance
discharged, for rough assessment of the battery capacity. The load
test
must range from 20% ~ 100%
The battery capacity test will lead to the battery being completely
Battery capacity test discharged, for accurate assessment of the battery capacity. The load
must range from 20% ~ 100%
For UPS self-test. The user actives this function, 5 seconds later, a
System test
pop window will appear to show the result of this test
Manually stop the test, including maintenance test, capacity test and
Stop testing
system test
Forcing charge Manually conduct the forcing boost charge for battery
Stop forcing charge Manually stop the forcing boost charge for battery
Monitor Version Provide the monitor software version
Rectifier Version Provide the rectifier software version
Inverter Version Provide the inverter software version
Liebert ITA 16kVA/20kVA User Manual
Explanation