Side Panel Switch & Connectors - Yaesu FT-817nd Operating Manual

S P
IDE ANEL
MIC Jack
Connect the supplied MH-31
SP/PH Jack
This 3.5-mm, 2-pin jack provides variable audio output for an external speaker (4 Ω ~
16 Ω impedance) or earphones. The audio level varies according to the setting of the
front panel's
When you insert an earphone plug into this jack, the SP-PH slide switch (lo-
cated to the right side of this jack) MUST BE set to the "PH" position, to pre-
vent the possibility of injury to your ears.
SP-PH Switch
If you use earphones with this transceiver, move this switch to the "PH" position be-
fore inserting the earphone plug into the SP/PH Jack, to prevent injury your ears.
16
S
WITCH
Hand Microphone to this jack.
A8J
knob.
& C
ONNECTORS
FT-817 Operating Manual