Yaesu FT-817nd Operating Manual page 67

Menu Item 32 [ LOCK MODE ]
Function: Select the operation of the front panel's
Available Values: DIAL/FREQ/PANEL
Default: DIAL
DIAL: Locks
FREQ: Locks front panel keys and knobs related to frequency control (such as
PANEL: Locks all front keys and knobs (except
Menu Item 33 [ MAIN STEP ]
Function: Setting of the
Available Values: FINE/COARSE
Default: FINE
You may choose between two speeds for the
the tuning rate compared to the default value.
Menu Item 34 [ MEM GROUP ]
Function: Enable/disable the memory grouping feature
Available Values: OFF/ON
Default: OFF
When this Menu Item is set to "ON," the 200 "standard" memory channels are partitioned
into ten Memory Groups, each holding up to 20 memory channels.
Menu Item 35 [ MEM TAG ]
Function: Store Alpha-Numeric "Tags" for the memory channels.
Up to eight characters may be stored. The storage procedure is as follows:
1. Recall the memory channel on which you wish to append a label.
2. Recall this Menu Item [Menu #35 (MEM TAG)].
3. Press the
appear below the first character location).
4. Rotate the
name you with to store, then rotate the
character.
5. Again rotate the
the knob clockwise to move to the next character's slot.
6. Repeat step 5 as many times as necessary to complete the name tag for the memory.
7. Press the
FT-817 Operating Manual
knob only
and key,
knob's tuning speed.
knob momentarily to initiate storing of the Tag (an under-bar will
knob to select the first character (number, letter, or symbol) in the
knob to select the next number, letter, or symbol, then rotate
knob to save the A/N (Alpha-Numeric) Tag and exit.
M O
ENU
key.
( A/B ) key., etc.)
key and
knob. Selecting "COARSE" doubles
knob clockwise to move to the next
PERATION
key)
65