Safety Label; Minimum Clearance To Combustible Materials - HearthStone Craftsbury 8390 Owner's Manual

S L
AFETY ABEL
CONTACT YOUR LOCAL BUILDING OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA
WARNINGS
Do not use grate or
elevate fire. Build
wood fire directly on
hearth.
Do not overfire. If
the heater or chimney
connector glows, you
are overfiring.(See Manual)
Caution: Hot while in operation, Do not touch
Keep children, clothing, and furniture away.
Contact may cause skin burns. See nameplate
and Owner's manual.
PARALLEL
A - 24" (61cm) C - 17" (44cm) E - 24.5" (62cm)
B - 14" (36cm) D - 21" (53cm)
* Refer to the Installation Manual for additional clearance information, Installation Instructions, and Operating Instructions.
DO NOT REMOVE OR COVER THIS LABEL
HearthStone Quality Home Heating Products Inc ®
Also Suitable for Mobile Home Installation Pursuant to (UM)84-HUD
Manufactured by:
Intertek Testing
Services NA, inc.
Do not operate with
doors open.
Do not obstruct space
under heater
TYPE OF FUEL:
Solid Wood Only

Minimum Clearance to Combustible Materials*

ALCOVE
CORNER
SIDE
VIEW
F - 22.5" (57cm)
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with July 1, 1990 particulate emissions standards
2006 2007 2008 Jan Feb
Listed Room Heater, Solid Fuel Type
Industrias Hergom S.A.
Apdo. de Correos, 208 de Santander
Santander, Spain 39080
"PREVENT HOUSE FIRES"
Install and use only in accordance with manufactures installation
instructions and your local building codes.
CAUTION: Special methods are required when passing chimney
through a wall or ceiling, refer to local building codes. Do
not connect this unit to a chimney flue serving another appliance
NOTE: Replace glass only with 4mm CERAMIC IR or
NEOCERAM IR glass.
WARNING: (MOBILE HOME) An outside air inlet must be provided
for combustion and be unrestricted while unit is in use.
Inspect and Clean Chimney Frequently-Under Certain
Conditions of Use, Creosote Buildup May Occur Rapidly.
Date of Manufacture
Mar Apr May Jun Jul
MADE IN USA
29
MODEL NAME: CRAFTSBURY-8390
TESTED TO: UL 1482, ULC S627
SERIAL #
or 317 Stafford Ave.
Morrisville VT 05661
USA
VENT REQUIREMENTS: 6 inch
diameter, single wall, minimum
24 MSG black or 25 MSG blue
steel connector with listed
factory-built Type HT chimney
or masonry chimney.
OPTIONAL COMPONENTS:
Blower Kit
Outside Air Kit
Rear Heatshield Kit # 93-68900
Viewing Screen Kit # 93-69900
ALCOVE
Noncombustible floor protection must extend 8"
beyond all sides and at least 16 inches (46cm CAN)
beyond the front of the stove.For horizontal chimney
connector installations, the floor protection must be
installed beneath the connector and 2" beyond
each side.
FRONT
VIEW
Aug Sep Oct Nov Dec
Kit # 90-57000
Kit # 90-53210
3300-622
Model 8390