Operation; Jet Operations - Aquatic LUXEAIR SERIES Owner's Manual & Installation Manual

Hide thumbs Also See for LUXEAIR SERIES:

Table of Contents

LuxeAir Series Owner's Manual & Installation Guide

NOTE: DO NOT START PUMP UNTIL ALL JETS ARE SUBMERGED. WATER LEVEL SHOULD BE 2" ABOVE HIGHEST JET.

All LuxeAir Series jets are removable, and can simply be put into the dishwasher for easy cleaning. (Note: use top rack

and remove before drying cycle.)

LuxeAir Series Whirlpool Jets

The LuxeAir Series combines Full-Size Pressure-Flo Hydrotherapy Jets, Aquatic Rotary Massage Jets and StressEaz Neck

and Shoulder Massage Jets (most models) to provide an invigorating hydrotherapy experience.

Full Size Pressure-Flo Hydrotherapy Jet:

Designed to facilitate targeted, deep tissue massage therapy. Each Full Size Pressure-Flo Hydrotherapy jet is fully

adjustable for direction of water flow and intensity of pressure.

StressEaz Neck and Shoulder Massage Jet:

Aquatic StressEaz Jets feature two side-by-side oval ports through which water moves simultaneously in opposite directions

to create a constant circular motion. This unique design effectively creates a consistent, even massage for the user's neck

and shoulder areas.

• To adjust pressure:

1. Grasp the outer ring of the jet.

2. Turn the outer ring clockwise to increase flow, counter-clockwise to reduce flow.

• To remove jet (see Figures 9A and 9B):

1. Grasp the outer ring of the jet.

2. Turn the jet counter-clockwise, until the jet clicks, then pull.

• To replace jet (see Figures 9A and 9B):

1. Insert the jet into jet housing.

2. Turn the jet clockwise, past point of resistance, until the jet clicks.

Aquatic

OPERATION

Figure 9A

Figure 9B

Table of Contents