Table of Contents
Advertisement
Focus aid in MF
•
Half press
• Always • Off
Sets how the focus aid arrowhead LED
symbols appear in the viewfinder display
in manual focus mode.
Half press makes them visible when
the shutter release button is pressed half
way.
Always makes them visible all of the time
when camera is active.
Off disables them completely.
AF assist light
• Camera •
Ext flash
• Off
Allows projection of light pattern to assist
the autofocus system in poor light or low
contrast situations.
Camera sets the integral AF assist illu-
mination to be always active.
External flash activates the AF assist illu-
mination projected by a suitable attached
external flash unit. When detached, how-
ever, the integral system is automatically
used.
Off sets the AF assist illumination to re-
main always inactive.
Rear wheel quick adjust
•
Yes
• No
Allows rear control wheel to make a rapid
EV adjustment (or EV compensation) in
auto-exposure mode.
Yes turns the setting on. By turning the
rear control wheel, the adjustment is made
and appears on both LCDs as a ± symbol
between the shutter speed and aperture
values. The amount of deviation also ap-
pears above the scale to the left of the ap-
erture value on the viewfinder LCD.
No turns the function off completely.
14/15
15/16
16/17
98
Control lock
•
All controls
• Wheels • Off
Sets the amount of locking used when the
Control Lock button is pressed.
All controls locks control wheels and but-
tons.
Wheels locks only control wheels. They re-
main operable in any setting mode, however.
Off disables lock function.
Film wind-on
(Film magazine
• Direct •
Half press
Sets when the film will be advanced to
the first frame.
Direct advances film automatically to the
first frame when the film holder is inserted
or when the magazine is attached.
Half press advances the film only when
the shutter release is pressed to half press
position.
Beeper
•
On
• Off
Sets the audible beeper signal.
On enables the signal.
Off disables the signal.
Show histogram
•
Yes
• No
Sets whether a histogram of a digital
exposure appears on the LCD after ex-
posure. Only for use together with digital
backs that support this feature.
Yes enables the setting.
No disables the setting.
Interval & Self Timer
•
Exit
• Stay
Allows either the Interval or Self Timer
mode to remain active after an exposure
or immediately return to standard set-
ting.
Exit clears the setting and produces an
automatic return to standard setting after
an exposure.
Stay retains the setting after an expo-
sure.
17/18
only)19
18/20
19/21
20/22
Advertisement
Table of Contents
