Table of Contents
Advertisement
1
3
5
2
4
6
4.2.2 Text
In Image info you can compose your own combination of letters, words,
symbols, etc to be included in the metadata. The same procedure is also
used to change a Profile name.
Text setting / Profile name changing
1) Press the MENU button on the grip.
2) Turn the front control wheel until Settings appears.
3) Press the Enter (DRIVE) button on the grip.
4) Turn the front control wheel to access 4.2 Image info.
5) Press the Enter (DRIVE) button to 4.2.2 Text.
6) On the left side of the screen there is a small box frame con-
taining an X symbol and two arrow symbols. By turning the
front control wheel, the selector cursor will enter the box
and by turning the rear control wheel the selector cursor will
move up and down.
When the X in the box is highlighted and the Sel.(AF) but-
•
ton is pressed, the character highlighted in the text line lower
down the screen will be deleted.
•
When an arrow in the box is highlighted, the text line cursor
moves along the text line in the arrow's direction, moving
past every character with every click on the Sel.(AF) button
to the desired position. The highlighted character in the text
line can then be replaced by a new character chosen by mov-
ing the selector cursor out of the box, positioning it over the
new character to highlight it, and then pressing the Sel.(AF)
button.
•
By turning the front control wheel, the cursor moves horizon-
tally.
•
By turning the rear control wheel, the cursor moves verti-
cally and introduces all available characters by scrolling the
screen.
101
'Image Info' only
applicable when
film magazine
attached
Advertisement
Table of Contents
