Digital - Hasselblad H3D 31MPix User Manual

1
3
5
ISO setting. ISO 400 chosen.
7
2
4
6
White balance setting.
'Tungsten' chosen.
options available
options available
5 Digital
From the Digital screen you can choose between various white balance
and ISO settings. These camera settings will override any such settings
made on the sensor unit and will show up on the OLED as new sensor unit
settings.
ISO Setting & White Balance
1) Press the MENU button on the grip.
2) Turn the front control wheel until Digital appears.
3) Press the DRIVE (Enter) button on the grip.
4) Turn the front control wheel to access either of the two
options, that are:
ISO setting and White Balance
5) In ISO setting, turn the rear wheel to choose between:
50, 100, 200 or 400.
6) In White Balance, turn the rear wheel to choose between:
Daylight, Cloudy, Shade, Flash, Fluorescent, Tungsten
and Manual.
7) Press SAVE (DRIVE button) to save the setting.

White Balance settings are only approximate color temperature
settings. They are only used for user convenience when viewing
the OLED on the sensor unit. The 3F file is a raw format file and
therefore contains all the information required for correction
in FlexColor and/or other software, regardless of the original
color temperature at the time of exposure .
105

Digital

ISO 50, 100,
200 or 400
Daylight, Cloudy,
Shade, Flash,
Fluorescent,
Tungsten and
Manual.