Grip Lcd - Hasselblad H3D 31MPix User Manual

Grip LCD

Typical camera grip display. (The information in brackets describes this particular example only).
Flash condition indication
(No exposure compensation,
normal flash synchronisation)
Aperture setting
(f/5.6)
Exposure Value display
(EV 9.3)
Exposure mode indication
(Aperture priority setting)
Typical camera grip display when changing settings.
Focus setting
(Autofocus setting, single
shot mode)
Metering method White balance
indication
(Centre weighted) (Daylight)
Command indication
The upper row on the screens describes commands (which
change according to the setting). The button immediately above
each command effects the change. So in this case, for example,
you would press the FLASH button to 'exit' from the screen. See
note below.
Settings symbols
Symbolize the options available when settings are changed. The
active symbol is depicted by a drop shadow.
Control wheel description and direction
Arrowheads symbolize which control wheel should be used to
change the setting they are beside. In this case, the Bracketing
option is chosen by the front control wheel and the number of
exposures in that option is chosen by the rear control wheel.
. . .
=
=
Setting information
The lower row on the screen displays information about the cur-
rent state of the setting. In short, the upper row displays what you
can do, and the lower row displays the current state of settings or
what you have done.
10
Drive condition
(Single setting)
Shutter speed setting
(1/400s)
ISO setting
(50 ISO/ASA)
Low battery symbol
'Exposure counter'
(1286 shots remaining on
chosen storage medium)
front control wheel
rear control wheel