User's Manual
connector, sound the DVR's internal buzzer, notify a number of different devices, move PTZ cameras to preset positions,
and/or display a camera on a SPOT monitor.
Video Loss
Highlight Video Loss and press the
Highlighting the box under the Actions and pressing the
for each camera. Each camera can be associated with another camera, trigger an Alarm-Out connector, sound the DVR's
internal buzzer, notify a number of different devices, move PTZ cameras to preset positions, and/or display a camera
on a SPOT monitor.
The DVR checks to see if anything is obscuring the camera. Highlight the box beside Check Obscuration, and press
button. A list of sensitivity ranging from 1 to 10 or Never appears. The sensitivity can be set from Never to
the
10 (extremely sensitive).
Video Blind
Highlight Video Blind and press the
anything is blinding a camera.
36
button, and the Video Loss setup screen appears.
Figure 26 : Event – Video Loss setup screen.
button. The DVR can be set to react to video loss differently
button, and the Video Blind setup screen appears. The DVR checks to see if
Figure 27 : Event – Video Blind setup screen.