Introduction - Teknetics G2 Owner's Manual

Congratulations!
Congratulations on your purchase of the new Teknetics G 2 metal detector. The newly
designed G 2 has been custom designed to find the smallest gold nuggets, but unlike
other specialized gold prospecting detectors, it can also be used for relic-hunting and
coin-shooting.
Whether you use your Detector in the backyard, at the shoreline, in the mountains or
fields afar, your investment will let you experience the excitement of searching for yet
uncovered treasures and give you hours and years of outdoor enjoyment. Out on your
own or with a group, places to use your G 2 are unlimited as buried treasures can be as
near as your doorstep or as far as you wish to travel.
This manual has been written to help you get optimal use of your detector, so we hope you
will read it thoroughly before your first outing and will also refer back to this manual from
time to time to reinforce features and methods as you become more proficient in the field.
Introduction to the G 2
DEEP PENETRATING GOLD NUGGET HUNTER
The New G 2 is unique among gold prospecting metal detectors for its
combination of high sensitivity to small gold nuggets and its versatile function
as an all-purpose treasure detector.
The controls and features are tailored to gold prospecting, including a
sophisticated ground balancing system, separate control over signal gain and
threshold, and a unique discrimination control system. These features also
make for a great relic-hunting detector. While the G 2 makes for a highly
competent coin-shooting detector, its user interface and features are not
specifically designed for this purpose. As a coin-shooter, you will notice that
the G 2 exhibits slightly lower sensitivity to high-conductivity coins, like a U.S.
quarter; this is a result of its specialized design to emphasize sensitivity to
small, low conductivity metals like gold nuggets.
3