Teknetics Delta 4000 Owner's Manual
Hide thumbs Also See for Delta 4000:

Advertisement

Quick Links

ACCESSORIES
Teknetics
®
Padded Carrying Bag.
Made of rugged double-stitched nylon construction. Includes
outside zip-pocket for extra accessories. – CBAG-T
Teknetics
Camouflage Backpack -
®
TKCBACKPACK
Teknetics
Camo Pouch
®
Camo pouch with two inside pockets, belt included
Stereo Headphones
®
True Stereo, compatible with all Teknetics
detectors, 1/4" jack with 1/8"
adapter, dual volume, coiled cable – HEADT
Pinpointer
Pinpoint exact location of target with audio and vibration indication. No
assembly required, uses one 9V (not included).– PINPOINTER
Teknetics
®
Gold Pick
Tempered steel head is 10" long, edge is 3-1/4" wide, overall length 19".
Durable fiberglass handle, rubberized hand grip and powerful super magnet
attached to head. – GOLDPICK
Replacement/Accessory Searchcoils
11" Biaxial Coil – 11COIL-TEK
10" Elliptical Concentric Coil – 10COIL-TEK
10" Biaxial Coil – 10COILDD-TEK
8" Concentric (Standard) Coil – 8COIL-7TEK
5" Biaxial Accessory Coil – 5COIL-TEK
Coil Covers
Specially made to protect your coil from abrasion and damage.
11" Biaxial Standard Coil Cover – COVER-11DD
10" Concentric Coil Cover– F70COVER
10" Biaxial Coil Cover – 2023190000
8" Concentric Coil Cover – 8COVER-7
5" Biaxial Coil Cover – 5COVER-BLK
Lesche Knife
Made from high quality heat-treated tempered steel. The ultimate digging tool.
Comes with a durable sheath.
12" in length with a 7" serrated blade –
LESCHE KNIFE
Teknetics
®
T-Shirt
100% cotton with Teknetics
®
Logo. Sizes: S, M, LG, XL & XXL – TKTSHIRT
Teknetics
®
Stainless Steel Coffee Mug
Teknetics
Camouflage Baseball Cap
®
Teknetics
®
Baseball Cap
One size fits all. – TKCAP
Face Rain Cover
Neoprene cover to protect from weather – RAINCOV-DELTA
Gold
Prospecting Kits
FOR COMPLETE DETAILS VISIT WWW.TEKNETICST2.COM • 1-800-413-4131
MDELTA
.
PCH-T
- TKMUG
(One size-fits-all) -TKCCAP
REV.6
METAL DETECTOR
OWNER'S MANUAL
If you do not have prior experience with a
metal detector, we strongly recommend that
you:
1) Adjust the Sensitivity to
a low setting in the
event of false signals.
Always begin use at a
reduced sensitivity level.
Expect chatter or internal
noise at high sensitivity.
2) Do not use indoors. This detector is
for outdoor use only. Many household
appliances emit electromagnetic
energy, which can interfere with the
detector. If conducting an indoor
demonstration, turn the sensitivity
down and keep the searchcoil away
from appliances such as computers,
televisions and microwave ovens. If
your detector beeps erratically, turn off
appliances and lights.
Also keep the searchcoil away from
objects containing metal, such as
floors and walls.
3) Use a 9-volt ALKALINE battery only.
Do not use Heavy Duty Batteries.
021115
Also available
with 11"DD coil
(Item# DELTA-11DD)

Advertisement

Table of Contents
loading

Summary of Contents for Teknetics Delta 4000

  • Page 1 PCH-T Camo pouch with two inside pockets, belt included – Stereo Headphones ® True Stereo, compatible with all Teknetics detectors, 1/4” jack with 1/8” adapter, dual volume, coiled cable – HEADT Pinpointer METAL DETECTOR Pinpoint exact location of target with audio and vibration indication. No assembly required, uses one 9V (not included).–...
  • Page 2: Table Of Contents

    TRE SURE HUNTER’S CODE OF ETHICS: TABLE OF CONTENTS • lways check Federal, State, County and local laws before searching. • Respect private property and do not enter private property without the owner’s permission. Terminology ..........3 •...
  • Page 3: Terminology

    TROUBLESHOOTING TERMINOLOGY The following terms are used throughout the manual, and are standard terminology among detectorists. TROUBLESHOOTING GUIDE SYMPTOM CAUSE SOLUTION Reference to a metal being "eliminated" means that the detector will not ELIMIN TION emit a tone, nor light up an indicator, when a specified object passes Detector chatters •...
  • Page 4: Assembly

    DEPTH AND TARGET DISPLAY ASSEMBLY also register here. Adjusting the Armrest Please refer to the display on your detector S-CAP: Older screw caps from glass bottles and reference the TARGET-ID categories will register here. Large gold rings, like a class below applicable to your model (not all ring, could also register here.
  • Page 5 ASSEMBLY (continued) TARGET IDENTIFICATION Caution: Forcing in MIDDLE STEM with CAM LOCK raised may form a burr on In DISCRIMINATION Mode, targets yield the same value with each pass of the cam lock. If this happens, remove burr with knife to allow insertion. Position S-Rod upright.
  • Page 6: Batteries

    10 minutes. the size of the holes you will dig. target is located in the middle of that Teknetics offers robust zone, where the sound is loudest. If the inexpensive pinpointer designed for...
  • Page 7: Quick-Start Demo

    QUICK-START DEMONSTRATION OPERATION and CONTROLS (continued) I. Supplies Needed MODE SELECTIONS • a Nail • a Zinc Penny (dated after 1982) • a Nickel • a Quarter There are three selections under the MODE section of the display. II. Position the Detector •...
  • Page 8: Ground Minerals

    OPERATION and CONTROLS (continued) THE BASICS OF METAL DETECTING A hobby metal detector is intended for locating buried metal objects. When MENU SELECTIONS cont.) searching for metals, underground or on the surface, you have the following challenges and objectives: NOTCH cont.) At any time, the display screen indicates the current category notches or discrim- 1.
  • Page 9: Emi (Electromagnetic Interference)

    OPERATION and CONTROLS (continued) THE BASICS OF METAL DETECTING (continued) The searchcoil produces a magnetic field and then detects changes in that 5. EMI (Electromagnetic Interference) MENU SELECTIONS cont.) magnetic field caused by the presence of metal objects. This magnetic field that the detector creates is also susceptible to the electromagnetic energy 2.
  • Page 10: Discrimination

    OPERATION and CONTROLS (continued) OPERATION and CONTROLS NOTE: Immediately after powering on, your detector's unique 10-digit serial MENU SELECTIONS POWERING UP number is displayed once on the LCD. Two digits are displayed at a time; five to increase or decrease sensitivity while the SENSITIVITY 1.

Table of Contents