Headphones - Teknetics G2 Owner's Manual

QUICK-START DEMONSTRATION
IX. Press-and-hold
a. Notice that motion is not required.
A motionless object induces a hum.
b. Notice the variable pitch & volume hum.
c. Move the nickel closer to and farther away from the searchcoil.
Notice the changing "depth" values.
X. Click the MODE knob to the right.
The detector is now in the ALL-METAL Mode
a. Keep GAIN set at the 12:00 position
b. Rotate the THRESHOLD knob slowly from the far counterclockwise
position to the full clockwise position.
Notice these attributes of the THRESHOLD control, with no metal
over the searchcoil.
i. at low settings you will hear no sound
ii. at mid-scale, there will be a transition point from no sound to
iii. at full scale you will hear a loud, constant tone. It may also have
Use with headphones
The G 2 is equipped with both a 1/8" and 1/4" headphone jack. Any headphones
with a stereo plug will work; headphones with a mono plug will not work. Using
headphones extends battery life, and also prevents the sounds from bothering
bystanders. It also allows you to hear subtle changes in the sound more clearly,
particularly if searching in a noisy location. Gold nuggets are often very small, so
closely monitoring changes in sound using headphones will improve your gold
prospecting results. For safety reasons, do not use headphones near traffic or
where other dangers, like rattlesnakes, are present. This device is to be used with
interconnecting cables/headphone cables shorter than three meters.
and hold the nickel over the searchcoil
a barely audible, choppy sound.
an irregular or choppy sound, as a result of electromagnetic
interference emitted from other electrical devices.
(not included)
9