Avery Dennison Monarch Sierra Sport4 9493 Quick Reference page 6

For fan-fold:
1.
Open the printer.
2.
Adjust the 4.8-inch (122 mm) core to the width of your fan-fold
supplies by pushing or pulling on the supply guides on each
side of the core. The guides move in 0.03-inch (0.8 mm)
increments.
3.
Insert the core between the supply holder tabs to open them to
their widest position.
4.
Position a stack of fan-fold supplies so they feed easily into the
front of the printer.
5.
Feed the fan-fold supply into the supply slot under the supply
door and between the supply guides on the core so that a few
inches extend past the front of the printer. Center the supply
across the platen roller.
6.
Close the printer. Make sure the printing side of the supply
faces up when the printer is closed.
6
Suppl y Slot