Avery Dennison Monarch Sierra Sport4 9493 Quick Reference page 4

L o a d i n g R i b b o n
Use a ribbon to print on thermal transfer supplies.
1.
Open the printer and tip the ribbon cassette back if necessary
and pull it towards you until it slides out of the printer.
2.
Rotate the two latches on side "A" of the cassette until they
snap into the unlocked (
3.
Turn the cassette so side "A" faces downward and lift side "B"
off and set it aside. Remove the unused ribbon and take-up
reel.
4.
Remove the clear wrap from a new ribbon and tear it at the
perforation.
5.
With the printed side of the ribbon facing out, slide the ribbon
reel onto the long spool with the foam washer and the take-up
reel onto the shorter spool. Do not touch the ribbon with your
fingers. Do not wrinkle or crush the ribbon.
Gear
Latches
6.
Replace side "B" of the cassette so the halves fit together
completely. Do not wrinkle or crush the ribbon.
7.
Rotate the latches so they snap into the locked (
Turn the gear counterclockwise with your fingers until you see
the black part of the ribbon.
8.
Slide the ribbon cassette back into the printer and close the
printer.
4
) position.
Take-up Core
A
New Ribbon
B
) position.