Download Print this page

Eclipse AVN4429 Installation Manual page 6

In-car audio visual navigation

Advertisement

Wire colours and connection points for connection cables
Antenna power supply (Blue)
1
Connect to the automatic-antenna control terminal of the vehicle.
2
Control power supply (Blue/White)
Connect the control terminal for the external amplifier, etc.
Not for Use (Pink)
3
Be sure to wrap PVC tape or use a similar cable insulating method.
Earth (Black)
4
Connect where good body earthing is available.
5
Vehicle speed pulse signal cable (Purple/White)
Connect to the vehicle speed pulse signal terminal.
Parking brake signal wire (Red/White)
6
Connect to the parking brake signal terminal.
7
Reverse signal Wire (Green)
Connect the reverse signal output of the vehicle to this terminal.
Genuine factory steering remote control terminal
8
Connect to the vehicle steering remote control.
Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control.
B
AV input terminals
Connect to the output wire of external video equipment or a device such as a VCR.
Yellow : Video signal
When the iPod cable is connected, the VCR cable cannot be connected.
C
iPod connection terminal
Connect to an iPod connection cable (sold separately).
USB connection terminal
D
Connect to a USB device such as a flash drive or digital audio player.
Playback will not be possible even when the iPod is connected to the USB connector.
E
Back-eye camera external input terminal (4P)
Used with the ECLIPSE back-eye camera (sold separately).
F
VTR output terminals
Connect to the monitor with video input.
G
Front line-out terminals
Connect to the RCA connector of an external amplifier.
Rear line-out terminals
H
Connect to the RCA connector of an external amplifier.
I
Line-out terminals (Sub-woofer)
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
Main unit connections
A
E-LAN terminal (13P)
If connecting portable audio equipment, connect an AUX cable (sold separately) to the E-LAN
terminal.
Ask your dealer for details.
White : Audio (left) signal
- 6 -
,
and
2
3
4
Red : Audio (right) signal

Advertisement

loading