Folding The Stroller - Joovy Ergo Caboose 42X Series Instruction Manual

Tire Pump
The tire pump is secured inside the storage basket.
• To use the tire pump, pull out the air tube from one
end of the air pump (Figure 33) and screw it snugly
into the opposite end of the pump body (Figure 34).
• Remove the protective cap from the tire tube air
valve. Attach air tube to the air valve on the tire.
• Pump air into the tube until the tires are filled to 28
psi or as specified on the tire wall.
• When finished, unscrew the air tube from the tire
valve and then from the pump. Replace the tire
valve cap. Replace the tube in the end of the pump
and secure the pump to its storage location in the
basket.

Folding the Stroller

• Keep children away from stroller while folding.
• Remove any infant carrier that has been installed on
the stroller.
NOTE: The stroller can still be folded with the optional
car seat carrier support in place.
• Position the stroller with the handlebar closest to you.
NOTE: RELEASE THE UPPER AND LOWER REAR
CANOPY ATTACHMENTS (IF INSTALLED).
• Close the canopy and push it to the front of the
stroller.
• Make sure that the rear wheel brake is set to the
locked position.
• While pushing in the secondary lock button on the
side of the right trigger, pull upward on the trigger
mechanisms on both sides of the stroller. See Figure
35.
• While these mechanisms are in the upward position,
push forward on the stroller using the handlebar.
• Once the stroller begins to fold, push the handle all
the way forward and down until the stroller is com-
pletely folded.
CAUTION: While folding the stroller, be careful to
keep your fingers from being pinched by moving
parts.
• The left and right folding lock tabs should engage the
extended rivets automatically. Ensure the tabs are
engaged. See Figure 36.
Pg. 11 Ergo Caboose Instruction Manual
Figure 33
Figure 34
Figure 35
Figure 36