Daikin MC401VE Service Manual page 22

SiE74-202
Operation Manual
6. Remove the ion filter roll.
7. Clean the ionizer.
•
How to clean the case
Remove dirt with a vacuum cleaner or by other means, and then
rinse the filter under plain water.
For stubborn dirt, wipe or soak in a neutral household detergent.
Use a soft cloth or soft bristle brush. Thoroughly rinse off all
detergent and dry in a dark place.
Note
•
Remove all lint after cleaning.
•
Do not use acidic or alkaline detergent.
Strong detergents can lead to rusting.
Electrode plates
•
How to clean the ionizer
Wipe the electrode plates and nearby plastic parts with a soft cloth
moistened with water or a wet tissue.
Note
•
When cleaning the ionizer, always wear rubber gloves to prevent
cutting on the ionizing wires.
•
Wipe ionizing wires from the backside of the ionizer. Wires can
come loose if pulled on from the front.
•
Be careful not to break the ionizing wires. If somehow broken,
contact the place of purchase or Daikin's Customer Service
Center for replacements. If the unit is used with broken ionizing
wires, the Clean lonizer lamp will flash.
•
After cleaning, thoroughly dry the ionizer. Using the unit with the
ionizer still wet can damage the unit.
Ion filter (roll) case
Ion filter (roll) case
Pull ionizer in this direction.
Ionizing wires
Operating Manual
15