Operating Manual
1.8
Setup
10
How to Fit the Ion Filter Roll.
CAUTION
Always fit the prefilter and ion filter roll before use.
Use without filters can damage the equipment.
1. Remove the front panel.
Hold the front panel by the sides, pull up and out.
Front panel
2. Remove the ion filter (roll) case.
Hold the ion filter (roll) case by the left and right side handles, and
lift upward and out.
Ion filter (roll) case
3. Fit the filter roll.
Q
Face the ion filter (roll) case downwards as shown below and fit
the filter roll in the cutouts for the filter spool.
Holes
Dark side
Ion filter
(roll) case
R
Fit the holes on leading edge over the pegs on both sides of the
case.
Pegs
Pegs
or
Front panel
Handles
Filter roll
Insert ends
into cutouts.
Cutouts for
filter spool
SiE74-202
Operation Manual