How To Clean The Lonizer - Daikin MC401VE Service Manual

Operating Manual

1.13 How to Clean the lonizer

14
If (see page 4) on the front panel begins to flash, clean the ionizer.
1. Stop the unit and remove the power cable from its socket.
2. Remove the front panel.
See step 2 on page 13.
3. Remove the ion filter (roll) case.
Hold the ion filter (roll) case by the left and right side handles, and
lift upwards and out.
Ion filter (roll) case
4. Remove the prefilter.
See step 3 on page 13.
5. Remove the ionizer.
Press the tabs as shown below until lifting the ionizer slightly, then
pull towards you and out.
Press this way.
Tabs
Press this way.
Handles
2
Pull ionizer in this direction.
1
Ion filter (roll) case
Press this way.
Press this way.
SiE74-202
Operation Manual