Adjustment; Adjustment Types And Functions; Status Monitor; 41605601Th Rev.2 - Oki OKIPAGE 14e Service Manual

4.

ADJUSTMENT

This chapter explains adjustment necessary when a part is replaced.
This adjustment is made by changing the parameter values set in EEPROM on the main control
board. The status monitor or maintenance utility can be used to change these values.
Only service and maintenance personnel can use the maintenance utility. This utility cannot be
made public for printer end users.
4.1

Adjustment Types and Functions

4.1.1

Status Monitor

(For Microsoft Windows)
This status monitor has the following functions:
• Drum counter reset
• Charge roller cleaning
(1) Drum counter reset
This function resets the life of the drum counter when the EP unit is replaced. Clicking the "Reset"
button resets the life.
(2) Cleaning Page Function
This function cleans the charge roller of the EP unit; it is used when printing is unsatisfactory.
For details on how to operate this function, refer to "5.2.2".
4.1.2

Engine Maintenance Utility

See Appendix C.

41605601TH Rev.2

Figure 4-1
71 /