Setting Items - Oki OKIPAGE 14e Service Manual

4.1

Setting Items

(1) Setting Items
The following menu items are displayed on Menu from which settings are changed.
Menu
1.System
2.Engine-1
3.Engine-2
41605601TH Rev.2
Item Words displayed
1 User
2 Printer Type
3 Page PRT
1 LED Head Marking No.
2 Head Type
3 Strb Time
4 Optical Head
5 Print Position
1 Setting
2 LED Head Width
3 Wait Table
4 Engine Speed
Setting Item Detail
Specifies the destination(s).
Specifies the applicable model(s).
Selects Page Count printing "Enable" or "Disable" in menu
printing.
Adjusts the exposure time of LED Head.
Specifies the correction method of the correction head at 600
DPI.
Specifies the strobe time.
Selects single line (non-correction) type or double line
(correction) type for the LED Head data line.
Corrects the print start position.
Adjusts the transfer current value.
Specifies the number of physical dots in LED Head.
Selects 150°C or 135°C for wait temperature.
Specifies the engine speed.
137 /