3.3.15 Fusing Unit - Oki OKIPAGE 14e Service Manual

3.3.15 Fusing Unit

(1) Remove the upper cover (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the lower base unit (see 3.3.5).
(5) Remove the stacker cover assy (see 3.3.12).
(6) Remove four screws 1, lift and remove the fusing unit 2.
Caution: Fusing unit may be hot. Use care when handling.
Notes : 1.
2.
3.
41605601TH Rev.2
When reinstalling or removing the fusing unit, tighten or loosen the screws while
holding the fusing unit assy 2 down with your hand (it is being pushed up by back up
roller).
When reinstalling the screws 1, be sure to direct the screws into preexisting thread
and avoid damaging the threads.
Do not apply excessive torque when tightening the screws 1.
2
1
1
60 /