Troubleshooting Method; Led Status Message List - Oki OKIPAGE 14e Service Manual

4.3

Troubleshooting Method

When a problem occurs, go through the troubleshooting according to the following procedure.
Problem occurs
Problem displayed on
the status monitor
4.3.1

LED Status Message List

The listing of the statuses and problems displayed in the form of messages on the status monitor is
provided in Table 4-1.
Classification LED Status Message
Jam error
Paper size error
Tray paper out
41605601TH Rev.2
Troubleshooting
according to the LED
Status Message List
(see 4.3.1)
Table 4-1
Description
Blinking Notifies of occurrence of
OFF jam while the paper is
OFF being fed from Multi-
Purpose Feeder.
Blinking Notifies of incorrect size
OFF paper feeding from Multi-
OFF Purpose Feeder.
Blinking Notifies of no paper state
OFF of the Multi-Purpose
OFF Feeder.
Carry out detailed
troubleshooting
according to the
Troubleshooting Flow
(see 4.3.1)
Recovery method
• Check the paper in the Multi-Purpose
Feeder.
Carry out the recovery printing by
opening and closing the cover, and
turn the error display off.
• When the problem occurs frequently,
go through the Troubleshooting.
• Check the paper in the Multi-Purpose
Feeder.
Also check to see if there was a
feeding of multiple sheets.
Carry out the recovery printing by
opening and closing the cover, and
turn the error display off.
• Load the paper in Multi-Purpose
Feeder.
158 /