Appendix D
MAINTENANCE UTILITY GUI MANUAL
1.
Overview
This document provides detailed descriptions of the GUI, a maintenance utility corresponding to the
Op14e printer.
1.1
System Requirements
OS:
Japanese or English Windows95/98
RAM:
Japanese 12 MB or more/ English 8 MB or more
HDD:
2 MB or more of Available Disk Space (Installed)
CPU:
486 or more
640 × 480 resolution
Monitor:
2.
Utility Starting-Time Operation
The maintenance utility interprets environment setting languages based on the device IDs of
connected printers and analyzes their commands.
Environment setting languages to be specified in the printers are as follows:
No.
1
OKIPAGE 8p Plus
2
OKIPAGE 8w Plus
3
OKIPAGE 8w Lite
4
OKIPAGE 8z
5
OKIPAGE 8iM Plus
6
MOCROLINE 8wU
7
OKIPAGE 14e
When the device ID of a connected printer is anything other than those of applicable models, the
dialog to select an operating environment of the maintenance utility is displayed.
The environment setting language is determined to be OPEL if OPEL" is supported and, if this is not
the case, managed as PJL according to each command set in the device ID.
The operating environment is selected by model name, based on each language (OPEL/PJL), from
the combo box.
The utility runs only with "OKIPAGE 8w Plus" for OPEL and only with "OKIPAGE 8p Plus" for PJL at
present.
Dialog for Selecting Operating Environment
41605601TH Rev.2
ID Name of
Applicable Model
Environment
Model Name
Setting Language
PN248
PJL
OPEL
PN249
OPEL
PN251
OPEL
PN251
OPEL
PN257
OPEL
PN59
PJL
PN254
Remark
129 /