Table of Contents
Advertisement
The screen creates a traffic class rule to classify the upstream traffic, assign queuing
priority and optionally overwrite the IP header TOS byte. A rule consists of a class
name and at least one condition below. All of the specified conditions in this
classification rule must be satisfied for the rule to take effect. Click 'Save/Apply' to
save and activate the rule.
Traffic Class Name
Enable Differentiated Service
Configuration
Assign ATM Transmit Priority
Mark IP Precedence
Enter name for traffic class.
Enable Differentiated Service Configuration if
required.
Select Low, Medium or High.
Select between 0-7. The lower the digit shows the
higher the priority
If non-blank value is selected for 'Mark IP
Precedence' and/or 'Mark IP Type Of Service', the
corresponding TOS byte in the IP header of the
upstream packet is overwritten by the selected
value.
66
Advertisement
Table of Contents
