Table of Contents
Advertisement
The CPE's dhcp server is running on "Default". And ISP's dhcp server is running on
PVC 0/36. It is for setup-box use only.
In the LAN side, PC can get IP address from CPE's dhcp server and access internet
via PPPoE (0/33).
If the setup-box was connected with interface "ENET1" and send a dhcp request
with vendor id "Video", CPE's dhcp server will forward this request to ISP's dhcp
server.
And CPE will change the portmapping configuration automatically. The portmapping
configuration will become:
1. Default : ENET2, ENET3, ENET4, Wireless, Wireless_Guest and USB.
2. Video: nas_0_36, nas_0_37, nas_0_38 and ENET1.
81
Advertisement
Table of Contents
