Comtrend Corporation CT-5372E User Manual page 69

SET-2
802.1p Priority
Traffic Class Name
Priority
IP Precedence
Mark IP Type Of Service
Physical LAN Port
Protocol
Source IP Address
Source Subnet Mask
Source Port (port or
port:port)
Destination IP address
Destination Subnet Mask
Destination port (port or
port:port)
802.1p Priority
If the Enable Differentiated Service Configuration box is ticked (i.e. selected)
the following screen will be displayed:
Select between 0-7.
Enter name for traffic class
Select Low, Medium or High.
Select between 0-7. The lower the digit shows the
higher the priority
Select either: Normal Service, Minimize Cost,
Maximize Reliability, Maximize Throughput,
Minimize Delay
User can select from: ENET, ENET(1-4), USB,
Wireless or Wireless_Guest.
User can select from: TCP, TCP/UDP, UDP or ICMP.
Enter the source IP address.
Enter the subnet mask for the source IP address.
Enter source port number or range.
Enter destination IP address.
Enter destination subnet mask.
Enter destination port number or range.
Select between 0-7. The lower the digit shows the
higher the priority
68