Regulations - Contex IQ 2400 Series User Manual

Appendixes

Regulations

FCC Regulations
USA
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
CE Regulations
EU
This equipment has been tested and found to comply with the limits for a
Class A product according to EN55022.
VCCI Regulations
Japan
This equipment has been tested and found to comply with the limits for a
Class A product according to Agreement of VCCI:2008 (CISPR 22).
Toxic or Hazardous Substances or Elements
有毒有害物质或元素名称及含量
Part Toxic or hazardous Substances and Elements 有毒有害物质或元素
Name
Lead Mercury Cadmium Hexavalent
部件名称
(Pb) (Hg) (Cd) Chromium
铅 镉 (Cr (VI))
ûñ
六价铬
Scanner
O O O O
荧光灯管
O: Indicates that this toxic or hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement in SJ/T11363-
2006.
表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-
2006标准规定的限量要求以下。
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in
SJ/T11363-2006.
表示该有毒有害物质至少在该部件的某一均质材料中
2006标准规定的限量要求。
(Enterprises may further provide in this box technical explanation for marking "X"
based on their actual conditions.
企业可在此处根据实际情况对上表中打" X"的技术原因进行进一步说明。)
61
Polybrominated Polybrominated
biphenyls diphenyl ethers
(PBB) (PBDE)
多溴联苯 多溴二苯醚
O O
SJ/T11363-