Clearance Between Clutch Pedal Shaft And Clutch Pedal Bushing - Cub Cadet 8454 Service Manual

CHAPTER 3 8454
6.6 CLEARANCE BETWEEN CLUTCH
PEDAL SHAFT AND CLUTCH
PEDAL BUSHING
A. Measure the outer diameter of clutch pedal shaft.
B. Obtain the clearance by measuring the inner diam-
eter of clutch pedal bushing.
C. If the measurement is out of the allowable limit,
replace it.
Clearance between clutch pedal shaft
and clutch pedal bushing.
Outer diameter of clutch pedal shaft
Inner diameter of clutch pedal bushing
3-14
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Factory spec.
Allowable limit
Factory spec.
Factory spec.
0.007 ~ 0.101 mm
0.0003 ~ 0.00 4 in.
0.4 mm
0.0157 in.
24.980 ~ 24.993 mm
0.9834 ~ 09839 in.
25.000 ~ 25.081 mm
0.9842 ~ 09874 in.
D569-W02 May-2003