Cub Cadet 8454 Service Manual page 128

CHAPTER 4 8454
Hydraulic Pipes
1. Disconnect the main delivery hose (1), return hose
(2), right turning delivery hose (3) and left turning
delivery hose (4).
(When reassembling)
• In assembling the turning delivery hoses to the
steering controller, connect the delivery hose with
identification mark (tape) to the L port of the steer-
ing controller.
Tightening Main delivery
torque hose
retaining nut
Turning delivery
hoses
retaining nut
Panel Frame and Steering Assembly
1. Remove the panel frame mounting crews (Two
screws a upper part. Seven screws at lower part).
2. Take out the panel frame and steering assembly as
a unit.
(When reassembling)
• Do not get in the wiring harness between panel
frame and platform.
4-24
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
46.6 ~ 50.9 N·m
4.8 ~ 5.2 kgf·m
34.4 ~ 37.6 lbf·ft
24.5 ~ 29.4 N·m
2.5 ~ 3.0 kgf·m
(1) Main Delivery Hose
18.1 ~ 21.7 lbf·ft
(2) Return Hose
(3) Right Turning Delivery Hose
(4) Left Turning Delivery Hose
[A] Identification Mark (Tape)
569W429A
569W430A
D569-W02 May-2003