Cub Cadet 8454 Service Manual page 263

4.4 TO DISASSEMBLING AND TO ASSEMBLE
A. GEAR PUMP ASSEMBLY
1. Remove hydraulic pipes (3), (4) and inlet pipes (2)
installed on gear pump (1).
2. Loosen and remove bolt (2), gear pump (1) and
gasket.
• Be careful not to cause damages on
the gasket. If damaged, replace it with
a new one.
CAUTION
D569-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
HYDRAULIC SYSTEM
(1) Gear Pump
(2) Inlet Pipe
(3) Hydraulic Pipe 1
(1) Gear Pump Assembly
(2) Bolt
569W698A
(4) Hydraulic Pipe 2
(5) Priority Valve
569W699A
6-69