Cub Cadet 8454 Service Manual page 321

13. Remove frame cover (1) in left of frame assembly
and parallel pin connected with shuttle lever arm
(3) and then disconnect shuttle lever from shuttle
lever arm.
14. Remove cabin.
• Disassemble cabin carefully, ensur-
ing that it would not interfere with other
parts or there would be parts not disas-
CAUTION sembled.
D569-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(1) Cover, Frame
(2) Pin, Straight
CABIN SYSTEM
569W913A
(3) Lever, Shuttle
9-7