Cub Cadet 8454 Service Manual page 89

2) Injection nozzle
Nozzle Holder
1. Secure the nozzle retaining nut (7) with a vise.
2. Remove the nozzle holder (1), and take out the parts
inside.
(When reassembling)
• Assemble the nozzle in clean fuel oil.
• Install the push rod (4), nothing its direction.
D569-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(1) Nozzle Holder
(2) Adjusting Washer
(3) Nozzle Spring
(4) Push Rod
ENGINE
569W2D0A
(5) Distance Piece
(6) Nozzle
(7) Nozzle Nut
2-67